18 February 2021 - CS BETON PREFA is based in the Czech Republic and manufactures concrete precast elements for different application sectors, such as transport, water management or landscaping. For the second time, the company partners with ACIMEX for the conception of a new vacuum lifter dedicated to the handling of concrete elements.
January 14th, 2021 - On January 4th, 1971, ACIMEX, a company specialized in lifting and handling heavy loads, was born in Paris. After numerous years spent in Torcy, the company moved to St-Avertin, in the Loire Valley, in 2012, and is celebrating its 50th birthday this year.
January 07th, 2021 - Even if all her career has been built in the industry, Claire MONNET had to assume several jobs before becoming Purchasing & Sales Management Director at ACIMEX. Ten years after integrating the ACIMEX team, the lifting and handling of heavy loads using vacuum technology is no longer a secret to her.
December 07, 2020 - Started in 2017, the GRAND PARIS EXPRESS project is about renovating and expanding the Parisian metro network : it is now one of the most important European infrastructure projects. French SME ACIMEX multiplies orders of handling and lifting equipment.
2 October 2020 - When the Shaanxi Chinese offices were launched in 2016, ACIMEX intended to develop its tunnel activity. Setting up an office in China would allow better opportunities, with the presence of our representatives, ready to meet with clients and prospects. After four years, expectations have been more than exceeded.
September 1, 2020 - LUJABETONI, finnish company leader in the manufacturing of concrete products in its country, has renewed its confidence in ACIMEX by ordering once again a demoulding vacuum lifter for one of its production plants.
April 7, 2020 - The ACIMEX brand is recognized today as one of the leaders in heavy load handling for tunnel, the metallurgical industry, precast concrete and aeronautics. The energy world is not to be outdone, since through the Chinese SINOMATECH project, ACIMEX deploys its know-how at the service of new technologies and more particularly for wind power.
March 10, 2020 - Recently integrated into the product catalogue, the ACIMEX drop table is an innovative solution to move and to position breakwaters in the construction of dams in port areas. Let’s take a look at a construction site in Kuwait where ACIMEX provided such a product.
February 17, 2020 - ACIMEX works with cutting-edge specialists with very specific expertise for its niche activity, in order to provide more effective and precise equipment. Among other things, MESURIS offers equipment able to guide the positioning of armour units for the construction of breakwaters.
January 2, 2020 - Six months ago, Jérémy Bride Bonnot joined the electrical workshop at ACIMEX as an apprentice. In order to validate his electrotechnical degree, he will spend the next two years with the local SME, a time he will use to put into practice everything he learns electricity-wise at school. For ACIMEX, a win-win bet!
December 17, 2019 - ACIMEX, the French manufacturer of lifting equipment extends its know-how to pipeline sites. Large-diameter pipe lifters enable the construction and rehabilitation of water supply and sanitation projects, for drinking water and river systems.
November 21, 2019 - For several decades, the Principality of Monaco has been facing a lack of space on its territory which barely exceeds 2 km². The only way out to expand is to extend its borders by gaining land on the sea. In this context, ACIMEX was entrusted with the manufacturing of a lifting solution...
October 22, 2019 - Acknowledged as the leader in segment handling on tunnel construction sites, ACIMEX has decided to rethink its storage lifter in order to gain productivity in the factory during the prefabrication of segments.
September 5, 2019 - A key actor in the tunnel sector, ACIMEX is regularly sought after by the international manufacturers of tunnel boring machines during the construction of underground worksites. For some years, China has been a privileged Asian partner for the French SME.
August 1, 2019 - In May 2019, we talked about how ACIMEX France’s Study Office dealt with Chinese projects. A few months later, we decided to give the floor to our Chinese colleagues to share their own vision. Ye Tian, Director of Operations at ACIMEX in Shaanxi, played along.
July 16, 2019 - ACIMEX achieves a new performance with the creation of a new lifter, specially conceived for the handling and the fitting of wall panels. CARDINAL EDIFICE, a building company located in France and an expert in building construction, initiated the project.
July 11, 2019 - ACIMEX works in close collaboration with international agents to ensure its presence worldwide and to offer its products in the best conditions, by overcoming cultural and linguistic barriers. PerlaSeta Machinery, distributor in iron and steel industry, is the exclusive representative of ACIMEX lifters in Turkey.
May 16, 2019 - Kevin VETEAU has been a Drafting Technician at the ACIMEX Design Office since 2008. After 11 years spent in the company, he tells us about his everyday life in the french SME and especially about his work relationship with ACIMEX China.
April 18, 2019 - With always more exhibitors, a record exhibition space and more than 600,000 visitors, this 65th edition has kept all its promises. In the new hall dedicated to lifting and after 7 days of exhibition, ACIMEX reaffirms its interest for this international construction event and reinforces its image of specialist in the handling of heavy loads.
March 18, 2019 – « Coming up, many potential projects, some of which are imminent with probable benefits in the months to come "says Eric Lama - Sales Manager at ACIMEX. After four days of enthusiastic and qualified visits, ACIMEX - the expert in heavy lift lifting from Tours - looks back on the French industrial event of the year.
February 28, 2019 - A lifting specialist, ACIMEX produces customized vacuum lifters to handle and store tubes of different diameters and weights. Regularly used in the energy sector, STARLIFT pipe lifters have become essential equipment for many construction sites.
January 18, 2019 - ACIMEX, expert in lifting solutions for heavy loads, is known worldwide for its expertise in vacuum technology. In order to establish its reputation regarding all its application types, the french SME will have a dense commercial activity in the next six months.
December 27, 2018 - "As I arrived at ACIMEX to start the first chapter of my internship, I was a bit nervous. I had always fit in to a new group easily and was sure that I would get on with my new colleagues. Yet I was nervous nonetheless."
December 18, 2018 - APS, the diversification brand of CBE Group, was looking for a reliable and safe handling solution for its plants, able to lift every type of bloc for breakwaters. ACIMEX put its knowledge at the service of APS and conceived tailored equipment. This successful collaboration reveals the cohesive force of CBE Group.
November 29, 2018 – As part of its international business development, ACIMEX took part from 08 to 11 November 2018 in the GIC show in Piacenza, Italy, on the TECNOMOVINT booth, its Italian partner.
November 14, 2018 - ACIMEX innovates with its miniature vacuum lifter named the Easylift. Expert in the handling of heavy loads, the company found the solution to showcase concretely the efficiency of the vacuum lifting technology and the quality of its equipment to its clients.
October 30, 2018 - For almost 50 years, ACIMEX has been selling its range of lifting devices across the hexagon; some of them are in perfect working order and are still used by our clients. Last month, we visited LIOTARD, a company which incorporates in its production line the ACIMEX vacuum lifter they purchased in 1991.
September 28, 2018 - As a designer and manufacturer of heavy lifting equipment, a regular maintenance of the equipment combined with the supply of spare parts are strategic axes for ACIMEX. How did the company set up a tailor-made after-sales service to meet the requirements of its customers?
September 18, 2018 - Expert in lifting solutions in the construction, metallurgy, aircraft and energy industries, ACIMEX has been working for decades with world-renowned partners in the design of its machines. This is the case of STAHL Crane Systems, which collaborates with ACIMEX for the production of lifting grabs, segment trolleys or erectors.
July 27, 2018 - As an expert of heavy load handling, ACIMEX is an active member of CISMA, the union for construction, infrastructure, steel and material handling equipment.
June 19, 2018 - For 3 days, ACIMEX took part in the TOC EUROPE exhibition, based this year in Rotterdam. Worldwide players of the port sector attended the event: a beautiful showcase to present all ACIMEX lifting solutions adapted to this particular environment.
June 8, 2018 - TRIGANO VDL is the biggest motor caravan production unit in Europe. Located in the Rhone Valley, the company commissioned ACIMEX to modernize its production process and to get a viable automated lifting solution.
June 1, 2018 - As the 2017 edition was a success, ACIMEX will participate again in TOC EUROPE at "Ahoy Rotterdam" from June 12-14 on stand D1. Active in the port sector, ACIMEX will meet the worldwide players of the trade to present its global solutions for the lifting of heavy loads.
May 4, 2018 - On April 23-27, ACIMEX participated in the CEMAT exhibition, located at the "Hannover Messe" in Germany. Taking place at the same time as the Hannover Fair, CEMAT was, once again, the unmissable event for the handling industry.
April 19, 2018 - ACIMEX will be present at the CEMAT exhibition from 23 to 27 April 2018, at the "Hannover Messe" in Germany, on stand M11 in Hall 26.
April 12, 2018 - At the end of March, the ACIMEX team participated in the INDUSTRY trade show at the Parc des Expositions in Paris.
March 19, 2018 - ACIMEX will be present at the INDUSTRIE 2018 fair from 27 to 30 March 2018, at the Parc des Expositions in Villepinte - France.
February 20, 2018 – Owing to its reinforced presence in China since 2017, with the opening of the ACIMEX Shaanxi office onsite, ACIMEX is now participating in the construction of the new Chinese medium-haul aircraft.
January 18, 2018 - Since its creation in 1971, the company ACIMEX has quickly become a major player on his domestic market in the vacuum lifting of heavy loads.
January 17, 2018 - We spoke with Edouard Ferreira, who joined the company more than 30 years ago. He told us about ACIMEX, his role in the company and how he sees its future.
November 24, 2017 - The company, expert in lifting heavy loads, decided to get a sales support by designing and manufacturing a full-size demonstrator.
October 10, 2017 - ACIMEX released its new website at the beginning of summer 2017. A simplified tree view, refreshed content and numerous visuals allow the company to bring into light its products, designed to lift heavy loads (up to 30 tons) using the vacuum technology.
September 15, 2017 - In early October 2017, ACIMEX attended the event organized by SEPEM in Angers. During three days, a lot of companies from the Loire Valley introduced their industrial solutions to allow the smooth running of a production site.
September 8, 2017 - ACIMEX supplies the custom-made lifting machine that helps to load and unload ARCELOR’s brand new testing machine.
January 18, 2017 - ACIMEX has recently supplied a tube-lifter for lifting XXL pipes 50 metres long. These tubes act as piles: they will be installed securely offshore as a basis for building the platform for extending the current port.
December 9, 2016 - As part of a contract that DCNS, Europe’s leading naval shipbuilder, had won in 2014, ACIMEX has designed and produced a specific adjustable vacuum lifter, delivered in two sections and assembled on-site.
December 9, 2016 - After 6 months of preparation and intensive research, ACIMEX has been rewarded with this certification, which rates quality within the company.
February 1, 2016 - Officially opened in 2002 with just one line 9.4 km long and encompassing 15 stations, Rennes underground will be getting a second line, line B, in 2017.
February 14, 2015 - The French department of Bas-Rhin (Low-Rhine) invested in the construction of a geothermal power station at Rittershoffen, realization is planned for 2016.
